Gecko [ tsuru-no-tsurugi.tokyo ]

Name	Size	Permission	Date
archive	[ DIR ]	drwxr-xr-x	2024-02-17 03:48
Makefile	3.08 KB	-rw-r--r--	2020-07-17 12:50
Makefile.freebsd	1.98 KB	-rw-r--r--	2020-07-17 12:50
README	776 B	-rw-r--r--	2018-01-20 05:14
forwarded_sense.txt	296 B	-rw-r--r--	2011-02-11 02:54
nvme_dev_self_test.hex	806 B	-rw-r--r--	2018-02-19 14:55
nvme_identify_ctl.hex	1.17 KB	-rw-r--r--	2018-02-19 14:55
nvme_read_ctl.hex	1.79 KB	-rw-r--r--	2020-08-03 13:16
nvme_write_ctl.hex	1.8 KB	-rw-r--r--	2020-08-03 13:16
reassign_addr.txt	465 B	-rw-r--r--	2007-06-27 12:51
ref_sense.txt	305 B	-rw-r--r--	2011-02-09 06:43
scsi_inquiry.c	4.09 KB	-rw-r--r--	2018-12-08 01:42
sdiag_sas_p0_cjtpat.txt	405 B	-rw-r--r--	2009-06-08 11:30
sdiag_sas_p0_prbs9.txt	407 B	-rw-r--r--	2019-10-28 06:44
sdiag_sas_p1_cjtpat.txt	464 B	-rw-r--r--	2009-06-08 11:30
sdiag_sas_p1_idle.txt	560 B	-rw-r--r--	2009-06-12 05:41
sdiag_sas_p1_prbs15.txt	408 B	-rw-r--r--	2019-10-28 06:44
sdiag_sas_p1_stop.txt	359 B	-rw-r--r--	2007-06-27 12:53
sg__sat_identify.c	7.55 KB	-rw-r--r--	2018-02-22 16:00
sg__sat_phy_event.c	12.02 KB	-rw-r--r--	2018-02-22 16:00
sg__sat_set_features.c	9.7 KB	-rw-r--r--	2020-12-08 07:38
sg_compare_and_write.txt	2.42 KB	-rw-r--r--	2019-09-18 06:53
sg_excl.c	5.98 KB	-rw-r--r--	2018-12-29 14:00
sg_persist_tst.sh	3.54 KB	-rwxr-xr-x	2017-11-05 14:08
sg_sat_chk_power.c	8.95 KB	-rw-r--r--	2018-12-08 01:42
sg_sat_smart_rd_data.c	6.4 KB	-rw-r--r--	2018-12-08 01:42
sg_simple1.c	5.87 KB	-rw-r--r--	2018-12-08 01:42
sg_simple16.c	3.41 KB	-rw-r--r--	2018-02-22 16:00
sg_simple2.c	6.59 KB	-rw-r--r--	2016-05-29 05:14
sg_simple3.c	6.46 KB	-rw-r--r--	2016-05-29 05:14
sg_simple4.c	7.25 KB	-rw-r--r--	2016-05-29 05:14
sg_simple5.c	7.47 KB	-rw-r--r--	2018-02-22 16:00
sg_unmap_example.txt	1.53 KB	-rw-r--r--	2020-07-17 12:50
sgq_dd.c	37.77 KB	-rw-r--r--	2019-03-26 12:54
transport_ids.txt	1.1 KB	-rw-r--r--	2020-07-17 12:50

Rename

#		sg_compare_and_write.txt
# This file provides a usage example of sg_compare_and_write.
# sg_compare_and_write accepts a buffer containing 2 logical instances:
# - the verify instance: used to match the current content of the LBA range
# - the write instance: used to write to the LBA if the verify succeeds
#
# In case of failure to verify the data, the command will return with check
# condition with the sense code set to MISCOMPARE DURING VERIFY OPERATION.
#
# The following example shows initialization, successful and unsuccessful
# compare and write using sg3_utils. I am using caw_buf_zero2one and
# caw_buf_one2zero as shown below.

$ hexdump /tmp/caw_buf_zero2one
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
0000200 1111 1111 1111 1111 1111 1111 1111 1111
*
0000400

$ hexdump /tmp/caw_buf_one2zero
0000000 1111 1111 1111 1111 1111 1111 1111 1111
*
0000200 0000 0000 0000 0000 0000 0000 0000 0000
*
0000400

$ sg_map -i -x
/dev/sg0  0 0 0 0  0  /dev/sda  ATA       ST3320613AS       CC2H
/dev/sg1  3 0 0 0  5  /dev/scd0  HL-DT-ST  DVD-RAM GH22NS30  1.01
/dev/sg2  5 0 0 0  0  /dev/sdb  KMNRIO    K2                0000
/dev/sg3  5 0 0 1  0  /dev/sdc  KMNRIO    K2                0000

# First I zero out the volume to make sure that the first compare and write
# will succeed
$ sg_write_same --16 -i /dev/zero -n 0x200000  -x 512 /dev/sdc

$ dd if=/dev/sdc bs=512 count=1 skip=100 2>/dev/null | hexdump
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
0000200

$ ./sg_compare_and_write --in=/tmp/caw_buf_zero2one --lba=100 --xferlen=1024 /dev/sdc

# contents of LBA 100 are a block of ones
$ dd if=/dev/sdc bs=512 count=1 skip=100 2>/dev/null | hexdump
0000000 1111 1111 1111 1111 1111 1111 1111 1111
*
0000200

# We repeat the same compare and write command (zero2one input buffer).
# compare and write fails since the verify failed (compared the zero block to
# the actual 1 block in LBA 100
$ ./sg_compare_and_write --in=/tmp/caw_buf_zero2one --lba=100 --xferlen=1024 /dev/sdc
COMPARE AND WRITE:  Fixed format, current;  Sense key: Miscompare
 Additional sense: Miscompare during verify operation
sg_compare_and_write: SCSI COMPARE AND WRITE failed

# Now we use the second buffer (one2zero)
$ ./sg_compare_and_write --in=/tmp/caw_buf_one2zero --lba=100 --xferlen=1024 /dev/sdc

# operation succeeded, contents of LBA 100 are back to zero
$ dd if=/dev/sdc bs=512 count=1 skip=100 2>/dev/null | hexdump
0000000 0000 0000 0000 0000 0000 0000 0000 0000
*
0000200